See here the list of Top 10 best water softeners. Read the buying guide and other important factors before making a selection for you or any of your dear ones

[amazon bestseller=”best water softeners”]

It is not so easy to find the best water softening system, because the offer is very large and the differences between the different variants as well. In order to balance the different types of water softeners, you should first study the water hardness in general and then evaluate each model in terms of processing, capacity and price-performance ratio. If this is too time-consuming and you prefer to make a quick and yet good purchase decision, we can help you, because we have already done the research for you. 

So we can give you the model w2b800 from Water2buy Highly recommended, because the system convinces by a fair price in connection with a high performance, an efficient softening and a solid processing. Alternatively, the model AS200 by Water2buy is highly recommended, because the device is very compact and yet offers a high performance in conjunction with very good results.

Water softening systems Purchasing advice

The range of soft water systems and water softening systems is very large. The search for the best system is correspondingly time-consuming. Our recommendation is to first take a general look at the hardness of the water to understand what the plants are doing. Only then does it make sense to look at the different types of systems and to look at the advantages and disadvantages or to compare prices between the models in question. To help make the decision even easier, you can take a look at the final leaderboard for an overview of the best 2019 water softening systems we have tested.

Information about water hardness in general

Whether a cheap water softening system is sufficient for your purposes or whether you should rather resort to a higher quality and more powerful model, depends essentially on your consumption and the existing water hardness at your house connection.

Water hardness in Germany: In hard water many salts such as magnesium or calcium ions are dissolved. The recommended hardness for drinking water is 7 ° dH. dH means “degree of German hardness” and in many cities it is significantly higher. Whether you have particularly hard water, you often recognize the dishwasher, namely, when the glasses always come out dull or with white spots. For example, you have very soft water in Bremen and the surrounding area (5 ° dH) and in Dresden the water is still very soft with 8 ° dH. 

By contrast, the water in the Rhineland (Cologne with 20 ° dH, Düsseldorf with 14 ° dH) is very hard and in Hamburg (16 ° dH) the water is also quite hard. In comparison, there are also many cities like Stuttgart, where the water is still moderate at 11 ° dH. How hard your water is, You can ask the local water utility or use simple test strips or water hardness test methods. You need to know your water hardness, because depending on the hardness, the water softener will also be adjusted accordingly or filled with salt.

Types of water softening systems

Basically, all water softening systems work according to the principle of ion compensation. The dissolved salts in the water are dissolved out, so that the water becomes softer. Although it is possible to differentiate the systems according to those for single households and families, or for systems for domestic connection and a nor, the more common distinction is, however, the type of process that is used in the system. Keep in mind that many of the systems should be professionally installed if you do not hesitate to connect to water.

To help you decide which model to use for your purposes as the best water softening system, we have summarized below a short overview for you. Two methods are currently available for home water softening systems:

Physical method: The physical method is based on magnetic fields and electric fields, which should trigger a change of the lime crystals. However, this method is rather doubtful, so that the results are correspondingly worse compared to the other method.

Cation Exchange: The much more promising method is cation exchange, because it removes calcium and magnesium ions from the water, which is done by exchange resins. Since this process saturates the exchange resin, it must be constantly renewed, similar to the salt for the dishwasher. This results in follow-up costs, because if the salt container is no longer full, of course, no softening effect occurs any more. How much salt you consume depends on how hard the water is and how much water you consume.

Advantages and disadvantages and choice of salt

With a decalcification system or a water softening system, you can protect your water pipes as well as devices that are filled with drinking water from calcification. This applies for example to irons or coffee machines. In addition, the fittings are better protected against lime deposits. In the end, this will reduce the cost of replacing fittings and appliances. In addition, clothing is also much softer and longer lasting. And last but not least, with less limescale on the faucets, you also need less cleaning. The maintenance of water pipes are of course also correspondingly lower over the years, it must be remembered, however, that descale the carbonation in the water increases,

When it comes to choosing the right salt for your descaling system, you can not go wrong in the end, since all the salts that are approved for use in chemical descaling systems serve their purpose. This applies regardless of whether you opt for rock salt, solar salt or evaporation salt. If you buy a large decalcification system for the house water pipe, you can benefit in addition to the positive effects mentioned above, that your skin and hair are protected during showering and bathing. However, the flow through the descaling unit is correspondingly large, meaning that you have to refill salt much more frequently than with a water softening system that is only connected to a water connection in the kitchen.

Water Softening System Test Winner – Top 5

If you suffer from hard water, a water softening system in a family home or anywhere you want softer water can make a real difference. However, since the supply of water softening systems is so large, the decision for a model is not easy. Which water softener is worth to the connection to the water pipe, we examined in the test. The test winners can be found in our Top 5 list of the best water softening systems of the year 2019. 

Since there are both home-water softening systems for the main water connection, as well as plants that are connected directly to the water pipe in the house or apartment, you should consider in advance, which variant comes into question for you. If you only need a water softener to boil coffee or tea or to cook,Simple water filter for you in question, because even a cheap water softening system is many times more expensive than a simple water filter.

1. Water2buy w2b800 

The best water softening system was the w2b800 from Water2buy. Both in price comparison and in terms of results, the softener was convincing. In terms of price, it is located in the midfield and offers the bottom line a very good price-performance ratio, because workmanship and results are impressive.

The model removes up to 100% of limescale in the house and is specially designed for hard water areas. It runs very quietly and due to the compact size, the device fits perfectly under almost any kitchen sink. On average, almost 3,700 liters of soft water can be produced up to a hardness of 500 PPM per day. Please note that connecting hoses, overflow and sewage hoses are not included in the delivery. They must be purchased additionally. Suitable is this set.

The installation itself is very simple and straightforward and can easily be done by a layman. Thanks to the comfortable lid, the softening salt is very easy to fill. For this salt can be filled in block as well as crystal and tablet form. Since salt is only needed in regeneration mode, when the IonX granules are cleaned inside, the unit works efficiently and for a long time without having to refill it.

It takes such a cleaning cycle, which runs silently about 30 minutes. If necessary, you can set the cycle to a time in the middle of the night, so it does not affect your daily routine. The experience with the water softener has shown that on average about every 4 weeks salt must be refilled in a 25-kilo bag. The device measures a total of 22.5 x 47.5 x 1.10 meters. At the back, about 15cm of additional space is needed for the hose connection. Unfortunately, the language on the device itself can not be set to German and the water hardness tables in the manual are certainly not perfect. 

2. Water2buy AS200 

The AS200 is a highly recommended and well-made model. It is designed for households with a maximum of four people and creates on average about 1,250 liters of soft water per day, with a hardness range up to about 400 PPM. A bypass valve is already installed, so you can use the softening only when you really need it. Additional hoses for overflow and sewage is still needed. Suitable are for example these here .

The performance was convincing in the test on the whole line, because it can remove up to 100% of the lime in the water. Naturally softening salt is required for the operation, which can be filled in both cube and crystal or tablet form. In general, a filling of 25 kilograms of salt is sufficient for up to 5 weeks, but of course this depends on the consumption. The salt is consumed by the device only when the internally available granules are cleaned. This cleaning process takes about 30 minutes and can also be set to a specific time of the night.

Unfortunately, the control unit can not be set to German and thanks to the small size of the model fits easily into the cabinet below the sink. It measures only 52 x 22 x 65 cm. The water pressure itself is not affected by the device. Also note that there is only one English plug, so you may still need a power outlet adapter. The bottom line is that the device is ideal when you have limited space. The overall price-performance ratio is very good, so that the purchase in any case, despite the smaller weaknesses can be worthwhile.

3. Aquintos water treatment MKC 32 

The water treatment plant of Aquintos works with a capacity up to the next regeneration of up to 3,200 liters at 10 ° dH, 2,400 liters at 15 ° dH and 1,600 liters at 20 ° dH. As a result, it is generally sufficient for a 4-family household or even more people.

For each regeneration process, the device requires a salt quantity of 1.3 kilograms and the power consumption is very low at only 2 watts. Due to the compact design, the device also fits under a sink. Particularly interesting is the fact that the water consumption of the last 61 days is determined. As a result, the system learns and uses this data to calculate the remaining capacity until the next cleaning cycle.

Unfortunately, no connection kit is included in the delivery, so it is recommended to order this right away. However, this drives the overall price up again, so that the price-performance ratio is not the bottom line. Due to the good results and the very good workmanship of the model, it was still able to convince in the test on the whole line. The matching connection set can be found here .

4. Grünbeck softliQ SC 18 

The soft water plant from Grünbeck works with a very high performance and low consumption at the same time. In standby, the system only requires 1 watt and in operation the power increases to 8 watts. The capacity is sufficient for 1-2 family houses and thanks to the intelligent control, the capacity is automatically adapted to the water consumption of the operator. Once a day the device regenerates itself automatically and thanks to the very efficient way of working, the consumption of salt is very low.

Operation is via the integrated color display, which works very well because it is intuitive and straightforward. Alternatively, you can control the device directly via the myGrünbeck app, because a WLAN module is also installed. If necessary, you must additionally install a pressure reducer. A bypass valve is also included, so that the delivery can also convince the bottom line. The device runs extremely efficiently and quietly and also the processing can convince completely. Overall, the system measures 85 x 60 x 40 cm, which makes it easy to place under a sink.

5. Medasa CEA-32 

The Medca decalcification plant is a very affordable model with a high capacity. At a hardness of 10 ° dH, the capacity is up to the next regeneration at 3,200 liters and drops to 1,600 liters at 20 ° dH. It is enough for 1 to 4-person households. It can remove up to 100% of the lime from the water, so that the hardness is reduced to 0 ° dH.

Operation is via the small control unit, which unfortunately can not be set to German. If that does not bother you, you’ll get a decent softening set with a decent performance that’s also solid and well made. In addition, there are 1 ” connections for reinforced hoses and detailed instructions. To connect, you must additionally order this set , if you have not yet the components in the house.

This increases the total price again, but the price-performance ratio remains good overall. Overall, the model measures 45 x 24 x 65 cm, so it also fits under a kitchen sink. Although the device does not work quite as efficiently as some expensive systems, in comparison to the cost price, the bottom line results are very good.